The Product
Tough Beyond
The Trunk.
Twister Tie Down™ is a screw-like apparatus the installer twists into the ground using our 28″ Metal T-Bar, which is included in every starter kit. Once it's in, it stays in: the helical flights lock into the soil and hold against wind load from every direction.
Twister incorporates solutions to the problems other tree anchoring systems face: a Hi-Vis yellow tensioner that does NOT loosen when properly installed and eliminates the need for warning tape, olive drab U.V.-stabilized multi-filament polypropylene webbing that won't rot, and a Metal T-Bar that eliminates the need for hammers and driving rods.
ALL components of the Twister Tie Down™ are manufactured and assembled in the United States of America.
Feature Breakdown
Every Detail Pulls Its Weight.
The system is simple on purpose: one anchor, one strap assembly, one high-visibility lock point. This layout focuses the callouts on the parts crews actually interact with in the field.
Embossed TWISTER Mark
Molded into the anchor body so the brand detail survives field use, mud, and sun.
Helical Flights
Aggressive screw geometry bites into the soil and holds against wind load from every direction.
Rot-Proof Webbing
Olive drab U.V.-stabilized webbing stays soft on bark while holding tension through the staking period.
Hi-Vis Tensioner
Bright yellow locking insert stays visible and does not loosen when properly installed.
Specifications
By the Numbers.
- Install Tool
- HDTH-28: 28" Heavy Duty T-Handle (Commercial/Contractor Grade), included in the starter kit
- Anchor Type
- Screw-in TWISTER ground anchor (now manufactured in black; design, strength and performance unchanged)
- Webbing
- 3/4" 500 lb. green polypropylene webbing, 15 ft. per anchor
- Tensioner
- Locking tensioner included with every anchor: does not loosen when properly installed
- Power Install Options
- TDS-12IP 1/2" impact driver shaft, or TDS-34 34" drive shaft for gas augers
- Tools Required
- None beyond the T-Handle. No hammers, rods, or rebar.
- Warning Tape
- Not required — Hi-Vis tensioner is the visibility marker
- Origin
- Manufactured & assembled in the USA (Bradenton, FL)
In the Box
Starter Kit Contents.
- 36×TWISTER screw-in ground anchors
- 1×HDTH-28 28" Heavy Duty T-Handle installation tool
- 36×Hi-Vis locking tensioners (one per anchor)
- 36×15 ft. green polypropylene webbing lengths (one per anchor)
- 1×Install instruction sheet (EN / ES)
The Lineup
Every SKU, In Detail.
Starter Kit
SK36-120836 TWISTERS w/15 ft. of green webbing & Tensioner with (1) HDTH-28 HANDLE.
Bulk Box
BK99-330899 TWISTERS w/15 ft. of green webbing & Tensioner.
3 Anchor Root Ball Kit
RB3-R3 Anchor Root Ball Kit with Ratchet: 3 anchors w/ 5 ft webbing, 3 hooks & 1 ratchet w/ 5 ft webbing.
4 Anchor Root Ball Kit
RB4-R4 Anchor Root Ball Kit with Ratchet: 4 anchors w/ 5 ft webbing, 4 hooks & 2 ratchets w/ 5 ft webbing.
Heavy Duty T-Handle
HDTH-2828" Heavy Duty T-Handle installation tool (Commercial/Contractor Grade).
Impact Driver Shaft
TDS-12IPTwister Tie Down Impact Driver (Twister Drive Shaft, 1/2" Impact). Recommended with a DeWalt or Milwaukee 1/2" impact driver.
Safety Clips
TDS Safety Clips for the TWISTER Drive Shaft. Sold 2 per pack.